Exact product and colour named
We help you name the exact product and colour on the application, so the approval you get matches the roof that is installed.
Most San Antonio master-planned subdivisions, Stone Oak, Alamo Ranch, The Dominion and the far north and far west communities, require architectural review committee approval for a change of roof material or colour. The City enforces no covenants and a City permit does not satisfy an HOA, and HOA approval does not substitute for a City permit. Both may be needed, and the HOA approval comes first, in writing, naming the exact product and colour.

The HOA's rules are its own documents: the declaration, the design guidelines and the architectural review committee application. Most HOAs require approval for a change of material or colour; like-for-like repairs often do not need it, but every HOA writes its own rules, so the only safe step is to check yours. The application names the exact product and colour, and the approval should come back in writing, naming the same product and colour, before work starts.
Texas law gives you one protection worth knowing. Property Code section 202.011 says a property owners' association may not prohibit shingles designed primarily to be wind- and hail-resistant, to provide heating and cooling efficiency greater than customary composite shingles, or to provide solar generation, provided the shingles resemble the shingles used in the subdivision, are more durable and of equal or superior quality, and match the aesthetics of surrounding properties. In practice, that covers most Class 4 architectural shingles in a colour near the approved palette. It does not cover a switch to a different material, such as shingles to metal panels; the HOA can still restrict that.
HOA approval is paper work with a roof attached. The items below are what we help with on every HOA job.
We help you name the exact product and colour on the application, so the approval you get matches the roof that is installed.
We help you get the approval in writing before work starts, so the job is not stopped halfway by a committee that was never asked.
We explain the hail-resistant shingle protection in plain language, and where it applies and where it does not, so you can use it properly.
A switch to a different material, such as shingles to metal, can still be restricted. We flag it before you choose, not after the application is denied.
We keep the two approvals separate in your mind and on the schedule: HOA approval first, City permit second, insurer third.
If an approval is denied, we help you understand what the committee objected to and what a revised application would need to change.
We help you find your HOA's declaration, design guidelines and architectural review application, and read what they require for your roof.
The exact product and colour are chosen together, matched to your HOA palette and to the section 202.011 protection where it applies.
The application is submitted naming the exact product and colour, with the product information the committee needs to see.
Work is scheduled only after the approval comes back in writing, naming the same product and colour.
The roof is installed as approved, and the finished work matches the approval, so there is nothing for the committee to object to afterwards.
We help you find your HOA's declaration, design guidelines and architectural review application, and read what they require for your roof.
The manufacturer's product and colour information the committee needs to see, so the application is complete the first time.
Physical colour samples matched to your HOA palette, so the committee sees the real colour, not a screen rendering.
The existing roof is photographed for the application, so the committee sees what is being replaced and why.
A written scope naming the exact product and colour, so the approval, the permit and the install all describe the same roof.
The statute text, cited not paraphrased, so you can check what the hail-resistant shingle protection actually says.
A simple log for your HOA correspondence: date, person, what was said. It matters if an approval is disputed.

A homeowner wanting Class 4 impact-resistant shingles may worry the HOA will refuse a change from the approved palette.
What we do: a product and colour matched to the palette, an application naming the exact product, and the section 202.011 protection explained, with approval in writing before work starts.
Book this service →
A homeowner wanting to switch from shingles to metal may not know the HOA can still restrict a material switch.
What we do: an honest read that section 202.011 does not cover a material switch, and a revised plan that kept the shingle system with a Class 4 upgrade instead.
Book this service →
A homeowner in a tile-look HOA may want a roof that reads as tile without tile weight.
What we do: a stone-coated steel panel profile matched to the HOA palette, approval in writing naming the exact product and colour, and the install done as approved.
Book this service →Most HOA roofing trouble is paperwork trouble: work started with no approval, an approval that never names the product, a material switch assumed to be protected by state law, or a City permit mistaken for HOA approval. These are the four we see most, and what happens when each one is left to surface after the roof is already off.
Ask a pro →We get approval in writing, naming the exact product and colour, before work starts, so the job is not stopped halfway.
An approval for a generic roof is not an approval for your roof. We name the exact product and colour on the application and on the approval.
Section 202.011 protects hail-resistant shingles. It does not cover a switch to a different material, and we flag that before you choose.
A City permit does not satisfy an HOA, and HOA approval does not substitute for a City permit. We keep the two approvals separate and in order.
“Found their ad on marketplace, super quick feed back. Gentlemen stopped by same day to inspect roof. This company is extremely professional and quick. They had our roof done in 2 days. Great price point and easy to work with. Thank you Juarez Contracting.”
Alethia VelazquezGoogle review
“Chris was professional, on time for the estimate, very informative about what needed to be done,and willing to work with me. Thank you for a job well done.”
Belinda SalinasGoogle review
“Very fast estimate and fixed within 24 hours of asking them for help. Very fast and very reliable. My roof looks great!”
Jamie KGoogle review
Usually, yes, in a master-planned subdivision. Most HOAs require architectural review approval for a change of material or colour. Like-for-like repairs often do not need it, but every HOA writes its own rules, so check yours.
Usually not, if they resemble the shingles used in the subdivision, are more durable and of equal or superior quality, and match the aesthetics of surrounding properties. Texas Property Code section 202.011 protects shingles designed primarily to be wind- and hail-resistant.
Yes, it can. Section 202.011 does not cover a switch to a different material, such as shingles to metal panels. The HOA can still restrict that, and we flag it before you choose.
It should be in writing and name the exact product and colour. A generic approval is not an approval for your roof, and the finished work should match the approval exactly.
Call (254) 329-0299 during business hours and we will help you get HOA approval in writing, naming the exact product and colour, before work starts.
Call (254) 329-0299 →Call us at (254) 329-0299 or send an email. We answer the phone during business hours and return after-hours messages first thing the next business morning. HOA help is by appointment.